Top 10 typical forklift crashes ， forklift procedure must focus on these matters ！.

Top 10 typical forklift crashes ， forklift procedure must focus on these matters ！.

Blog Article

Don't ignore the forklift at the workplace. If the operation is bad, there will certainly be major crashes in minutes, and there are several accidents involving forklifts.

Situation 1: The forklift cargo blocked the chauffeur's sight, and the individual in front can not be discovered, causing a moving mishap.
Case 2: In order to maintain the equilibrium of the forklift when lifting hefty goods, the workers utilized their body weight as the weight, which nearly created casualties.
Instance 3: The size of the forklift freight exceeds the allowed width of the path and holds on the roadside rack, which almost creates an mishap.
Situation 4: Forklift is speeding up and surrender throughout a turn.
Instance 5: The forklift motorist did not observe the pedestrian, and the pedestrian did not discover the forklift.
Situation 6: The forklift lifts the employees illegally, the forklift vehicle driver does not put on the seat belt, the forklift lifter falls and the driver is crushed when the forklift surrender.
Case 7: The forklift chauffeur did not put on a seat belt and dropped from the vehicle when it rolled over and was crushed.
Forklift procedure ought to pay attention to these issues ：.

Start.
1. Prior to beginning, observe the environments, and after verifying that there are no barriers that prevent the safety of driving, honk the horn initially and after that begin.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress (air pressure) scale must be secure before beginning.
3. When the forklift begins with a load, the chauffeur should first validate that the tons is secure and trustworthy.
4. The begin has to be sluggish and constant.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the pole ought to be slanted backward. .
2. Do not lift the fork expensive when driving. When getting in and leaving the job website or while driving, take care that there will be no barriers overhead. When the load is taking a trip, the fork must not be increased expensive, which will certainly affect the security of the forklift. .
3. After dumping, the fork should be reduced to the regular driving position before driving. .
4. When turning, if there are pedestrians or lorries close by, the driving signal should be provided initially. High-speed doglegs are prohibited. High-speed sharp turns will trigger the lorry to shed lateral stability and topple. .
5. When the forklift is downhill, it is strictly restricted to turn off the fire and slide, and it is restricted to brake instantly while driving with loads unless there are special circumstances.
6. When the forklift is running, it needs to follow the web traffic rules in the manufacturing facility and must maintain a certain security distance from the lorry in front. .
7. When the forklift is running, the tons has to remain in the lowest position that does not impede the driving, and the gantry must be effectively tilted back. The load will not be increased other than when piling or packing. .
8. The elevation of the load should not block the vehicle driver's view. In unique scenarios, when the product impacts the forward vision, drive at a low speed when reversing.
9. It is forbidden to switch on the ramp, nor to drive across the ramp. .
10. The risk-free driving rate of the forklift in the factory location is 5 km/h, and it must drive safely at a low rate when going into the production workshop area. .
11. When the forklift is lifted, raised or driven, it is restricted for workers to base on the fork to hold items and play a stabilizing role. .
12. If troubles are located, they will certainly be fixed and reported in a prompt manner, and they will never ever run with ailments or conceal them.

packing and unloading.
1. When fork-loading Electric Forklift Truck for Warehouse things, the distance between both forks ought to be adjusted as required to make the load of both forks well balanced and not skewed, and one side of the thing ought to protest the shelf. .
2. It is forbidden to collaborate with a single fork or use a fork top or Stand-on Electric Pallet Stacker draw. In special conditions, security warning signs must be set up to advise surrounding pedestrians. .
3. In the process of loading and discharging items, the forklift needs to be braked with the brake. .
4. The rate of the vehicle need to be slow and constant. Beware not to roll the wheels on the dunnage, so as not to extend the rolled objects and injure people. .
5. When utilizing a fork to fork the goods, the fork should be as deep as possible under the lots, and it ought to be kept in mind that the fork tip must not touch other products or things. The load must be maintained with very little back tilt of the gantry to make sure that the load does not move in reverse. The mast can be tilted ahead a little when the load is reduced to permit easy placement of the load and extraction of the forks. .
6. It is restricted to fork items at high speed and collide with tough things with the fork head. .
7. When the forklift is working, it is restricted for people to stand around the fork, so as to stay clear of the collapse of the goods and harm people. .
8. Straining is restricted, and it is prohibited to use forks to raise employees to participate in high-altitude procedures to stay clear of high-altitude falling mishaps. .
9. It is not permitted to utilize the brake inertia to slide, place, round or roll objects. .
10. It is not permitted to utilize forks to pick, transform pallet discharge.

Leaving .
1. It is prohibited to leave the forklift when the items on the fork are in the air. Prior to leaving the forklift, you need to unload the goods or reduced the fork framework.
2. Pull the emergency brake deal with to dead or dispirit the hand brake button.
3. The engine is turned off and the power is removed. (Except for unique circumstances, such as the vehicle driver does not leave the car's line of sight and does not surpass 1 minute).
4. Remove the key. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the look must be inspected, and gas, lubing oil and air conditioning water should be added.
2. Inspect the safety and security efficiency of beginning, running and braking.
3. Check whether the lights and horn signals are complete and efficient.
4. Throughout the operation of the forklift, check whether the pressure and temperature level are normal.
5. After the forklift is running, the external leakage should also be checked and the seals must be changed in time.

Forklift Safety Operation Specifications.
1. You must check prior to leaving the car;.
2. When you experience a person in front of you throughout driving, you should send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not exceed 5 km/h;.
4. When driving, the low point of the cargo must be 0.3 m ~ 0.4 m in the air;.
5. The turning should not be too sharp to prevent the propensity of " complimentary turning";.
6. Adding and down the incline needs to be slow and uniform, and no switching on the slope is enabled.
7. Do not drive throughout the slope. When the gradient is more than 10%, the lorry ought to be driven backwards when declining;.
8. When the forklift employees lug the goods and progress, if they encounter large or hefty products and most likely to the motorist's line of sight, they should take the turning around exercise
.
The "Eight Prohibitions" ought to be followed in the procedure.
1. Solitary fork operation is not permitted.
2. It is not enabled to raise the goods for far away driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and various other hazardous chemicals with forks.
5. It is not permitted to make use of inertia force to get the goods.
6. It is not permitted to make use of braking force to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to work with the pallet or fork, and it is strictly forbidden to stand under the fork after the fork is raised.
8. Do not drive side to side on inclines
.
Car parking is not permitted under the list below problems.
1. Curves, slim roadways, train crossings;.
2. Sections with a longitudinal slope higher than 5%.
3. When there is an barrier on one side of the roadway, the opposite side of the section with the very same size as the barrier need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844